The short answer
CBAM, the EU’s Carbon Border Adjustment Mechanism, charges a carbon price on the emissions embedded in imported steel, aluminium, cement, fertilisers, hydrogen and electricity. EU importers pay it, but Indian exporters carry it: through their prices, through the emissions data they must supply, and through what they disclose to investors. Payments began accruing on 1 January 2026.
Why does CBAM mafler to Indian exporters now?
Between FY 2024 and FY 2025, Indian steel and aluminium exports to the EU fell 24.4%, from US7. 71 𝑏𝑖𝑙𝑙𝑖𝑜𝑛 𝑡𝑜 𝑈𝑆5.82 billion, according to the Global Trade Research Initiative. Not a single euro of CBAM had been paid yet. European buyers were simply moving orders away from suppliers whose carbon they could not measure.
That is the real lesson of CBAM for India. The tax itself starts small. In 2026, EU importers pay for only a sliver of the embedded emissions, because the EU’s own producers still receive most of their allowances free. That share rises every year until it reaches 100% in 2034.
The data obligation, however, arrived in full on day one. A buyer who cannot get verified emissions from an Indian plant must use the EU’s default values, which are deliberately set high and carry a penalty mark-up. In a market where buyers can switch suppliers, the exporter with credible carbon data wins the order. The one without it loses on price.

What is CBAM?
CBAM, the Carbon Border Adjustment Mechanism, is an EU regulation (Regulation (EU) 2023/956) that requires importers of certain carbon-intensive goods to buy certificates matching the carbon price EU producers pay under the EU Emissions Trading System, so that imports and EU-made goods carry a comparable carbon cost.
Its purpose is to prevent “carbon leakage”: production moving to countries with weaker climate rules. Legally the obligation sits with the EU importer, not the Indian exporter.
Commercially, the cost and the data burden flow straight back up the supply chain.
CBAM ran a reporting-only transitional phase from October 2023 to December 2025. The definitive phase began on 1 January 2026, reshaped by the EU’s Omnibus simplification of October 2025.
How does CBAM work in practice?
For each shipment, the EU importer declares the emissions embedded in the goods. There are two routes:
- Actual values: installation-level data from the Indian plant, monitored using the EU methodology and checked by an accredited verifier.
- Default values: figures published by the European Commission for each product and country of origin, with the rising mark-up.
The gap between the two routes is where Indian competitiveness is decided. India’s base default for unwrought aluminium is 1.87 tCO2e per tonne, rising to 4.13 for plates, sheets and strip. For grey cement clinker it is 1.44. A plant whose verified figures beat these defaults hands its customer a smaller CBAM bill. A plant that cannot prove its figures hands over the default, plus the mark-up.
Two developments will widen the stakes:
- Downstream extension. The Commission proposed in December 2025 to add around 180 steel- and aluminium-intensive products, such as screws, bolts, wire, tubes and metal furniture, from 2028. The Council and Parliament have both adopted positions, and trilogue talks began in October 2026. This brings in India’s engineering and auto component exporters, many of them MSMEs.
- Recognition of Indian carbon prices. The EU published draft rules in May 2026 on deducting carbon prices paid abroad. India’s Carbon Credit Trading Scheme could qualify once its certificates trade, but no CCTS price exists yet.
- The India-EU trade agreement. Concluded in January 2026, the agreement gives Indian exporters no CBAM exemption. What it does include is a dedicated CBAM annex: an assurance that any flexibility the EU grants another country will also apply to India, plus a dialogue on recognising Indian verifiers and India’s carbon pricing. It is engagement, not relief.
A second border tax is also on its way. The United Kingdom’s CBAM starts on 1 January 2027 and covers aluminium, cement, iron and steel, fertilisers and hydrogen. Unlike the EU, the UK has already listed India’s CCTS as a qualifying carbon pricing scheme, so carbon prices paid in India can reduce UK liability once they exist. For exporters selling to both markets, that means two sets of rules, one set of plant data, and a strong case for gefling that data verified once and properly.
What does CBAM mean for aluminium and cement?
The two sectors face CBAM in very different ways.
Aluminium: direct, immediate exposure. India is one of the world’s largest primary aluminium producers and a mid-tier supplier to the EU, at around €1 billion in 2024.
Coal-based captive power makes Indian smelting carbon-intensive, and the defaults climb steeply for semi-finished products. Unwrought aluminium exports to the EU fell about 42% year on year to January 2026, according to AlCircle’s analysis. For smelters and rollers, verified data is now a condition of competing.
Cement: small direct exposure, larger indirect exposure. India ships most of its cement to nearer markets, so direct EU exposure is limited today. But cement carries the heaviest data burden, because both kiln and electricity emissions count, and clinker content drives the result. The UK’s own CBAM, which starts in January 2027, also covers cement. And Indian cement makers increasingly supply customers whose own products, and buyers, sit inside CBAM’s reach. [Read our CBAM guide for cement exporters.
What should Indian exporters disclose about CBAM?
CBAM is usually handled as a customs and sustainability task. It is also a disclosure question, and three audiences are asking.
Table 1: CBAM disclosure map for Indian exporters
| Audience | What they need | Where it goes |
|---|---|---|
| EU customers and their declarants | Installation-level embedded emissions, production route, precursor data and any carbon price paid, verified by an accredited verifier | Supplier emissions communication, contracts |
| Indian regulators and investors | CBAM as a material risk, with its financial implications and your response | BRSR Section A (material issues), BRSR Principle 6, Management Discussion and Analysis |
| Global investors and lenders | Effect of carbon pricing on margins, cash flows and strategy | IFRS S2-aligned climate disclosure, investor presentations |
Four principles keep the disclosure credible.
Quantify, don’t just name the risk. Saying “CBAM may affect exports” tells an investor nothing. Disclose EU revenue share, the products in scope, whether you supply actual or default values, and a cost range at current certificate prices.
Keep one set of numbers. The emissions figure you send an EU customer, your BRSR intensity and any CCTS submission must reconcile. A buyer, an analyst and a regulator may compare them.
Avoid “CBAM-ready” claims you cannot evidence. Being ready means verified installation data and a working supplier template. If you are not there yet, say what is in progress and by when.
Show the commercial response. Investors want to know what you are doing about it: renewable power contracts, lower-clinker products, verification plans, market diversification. That is the story behind the number. Our ISSB explainer.
What should exporters do next?
- Map exposure by product code, customer and volume against the 50-tonne threshold.
- Build installation-level monitoring to EU methodology, and line up an accredited verifier.
- Prepare a standard supplier emissions pack so customers stop sending ad hoc questionnaires.
- Model costs from 2026 to 2034 using actual and default values.
- Align disclosure across BRSR, the annual report and investor materials before the first declaration in September 2027.
Our view. CBAM is not mainly a tax story for India yet; at current payable shares, the cost is modest. It is a credibility story. Indian exporters are being asked to prove their carbon numbers to buyers who have alternatives. Those who can will compete on more than price. Those who cannot will discover, as steel and aluminium did in FY 2025, that the market starts charging before the regulator does.
Frequently asked questions
What is CBAM?
CBAM, the Carbon Border Adjustment Mechanism, is an EU regulation that puts a carbon price on emissions embedded in imported steel, aluminium, cement, fertilisers, hydrogen and electricity. EU importers buy certificates priced in line with the EU Emissions Trading System, so imports bear a carbon cost similar to EU-made goods.
When did CBAM start applying to Indian exports?
Reporting began in October 2023. The definitive phase, with financial liability, began on 1 January 2026. Certificates for 2026 imports go on sale on 1 February 2027, and the first annual declaration is due by 30 September 2027.
Do Indian exporters pay CBAM directly?
No. The EU importer, as authorised CBAM declarant, buys and surrenders certificates. But the cost is usually passed back through prices, and the importer depends on the exporter for verified emissions data.
What are CBAM default values?
They are emissions figures the European Commission publishes for each product and country of origin, used when verified plant data is not available. They carry a mark-up of 10% in 2026, 20% in 2027 and 30% from 2028.
How does CBAM affect Indian aluminium and cement?
Aluminium faces direct exposure: significant EU sales, carbon-intensive captive power and steep default values. Cement’s direct EU exposure is small, but its data burden is heavier because electricity emissions count, and the UK CBAM covers it from 2027.
Can India’s carbon market reduce CBAM costs?
Potentially. CBAM allows a deduction for carbon prices effectively paid at origin. India’s Carbon Credit Trading Scheme could qualify once certificates trade and the EU finalises its recognition rules. The UK has already listed CCTS for relief under its own CBAM.
What should companies disclose about CBAM in BRSR?
CBAM can be reported as a material risk in BRSR Section A, with its financial implications and the company’s response. Emissions data in Principle 6 should reconcile with the figures supplied to EU customers.
Where K&A comes in
K&A helps Indian exporters turn CBAM from a compliance scramble into a credible story: supplier emissions packs that EU buyers trust, BRSR and annual report disclosure that quantifies the risk, and investor communication that shows the response. If your products ship to Europe, let’s talk.
Sources consulted
- Regulation (EU) 2023/956 (CBAM) and Regulation (EU) 2025/2083 (Omnibus simplification, 8 October 2025)
- European Commission implementing acts of December 2025 on default values (2025/2621), embedded emissions methodology and authorised declarants; default values dataset version 2 (6 August 2026)
- European Commission draft implementing regulation on carbon prices paid in third countries (13 May 2026)
- Mayer Brown, CBAM downstream extension and road to trilogue (7 October 2026); Council general approach (12 June 2026); Parliament mandate (15 September 2026)
- EY, CMS, Anthesis and HFW briefings on the definitive period and 50-tonne threshold
- OPIS/McCloskey, CBAM factor and mark-up timeline
- GTRI, reports on CBAM and Indian steel and aluminium exports (2025-26)
- IETA, “Navigating the EU CBAM: Readiness, Carbon Data and Competitiveness for Indian Exporters” (2026)
- MIT CEEPR, Fischer and Mehling, “Recognizing Third-Country Carbon Prices Under the European CBAM” (June 2026)
- Climate Decode (20 October 2026) for quarterly CBAM certificate prices
- AlCircle and GreenSutra analyses of Indian aluminium and cement default values and trade
- Carbon Pulse, EU-India FTA text and CBAM (2026); Indo-German Chamber of Commerce and CSEP commentary on the CBAM annex
- Khaitan & Co, UK recognition of CCTS under UK CBAM (September 2026)
